I did this pic with a 30 degree engraving bit and 115 deg. stepover with a DOC of .05". Came out really nice for a 4x6 picture. I sealed the surface first with 2 coats of poly, cut the image, brushed on some black craft paint, and then wet sanded the surface to remove the black paint from the surface. Pretty simple and looks very good.(Way better than the picture I can take )
Dman
Just playing around
- Thkoutsidthebox
- Vectric Wizard
- Posts: 1487
- Joined: Wed Oct 25, 2006 3:19 pm
- Location: Europe