Second photo, first two rail sweep.

Gallery for images of work cut using PhotoVCarve

Second photo, first two rail sweep.

Postby mwwock » Sun Jun 05, 2016 5:43 am

A friend's father passed away so I snagged this pic off of his Facebook feed and sent this to him.

Cut at .035 depth, 1/8 ball nose, 8%, 65 inch per minute, double crosshatch at 60 degrees. Put two coats of sanding sealer, then four hand wiped coats of burnt umber glaze, let them dry a few minutes before wiping off, wait 15 minutes between coats. Then light sanding with 220 grit sandpaper and two coats of lacquer.
Attachments
image.jpeg
mwwock
 
Posts: 16
Joined: Wed May 13, 2015 10:25 pm
Location: Oklahoma City, OK
Model of CNC Machine: Laguna Swift With 4th axis

Re: Second photo, first two rail sweep.

Postby esteeme1 » Sun Jun 05, 2016 11:11 am

That looks very nice! The detail really l pops with the finish you used.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
User avatar
esteeme1
Vectric Wizard
 
Posts: 2127
Joined: Tue Nov 02, 2010 3:26 pm
Location: Chesapeake VA
Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark

Re: Second photo, first two rail sweep.

Postby BArnold » Sun Jun 05, 2016 5:08 pm

Nice work all around! Great use of texture and the finish process topped it off.
User avatar
BArnold
Vectric Craftsman
 
Posts: 169
Joined: Sat May 02, 2015 12:20 am
Location: Thomasville, GA, USA
Model of CNC Machine: SO2/XCarve hybrid w/NEMA23 on all axes


Return to PhotoVCarve - Gallery

Who is online

Users browsing this forum: No registered users and 2 guests