my first try with photo v carve

Gallery for images of work cut using PhotoVCarve

my first try with photo v carve

Postby craftyfifer » Wed Jan 06, 2016 7:13 pm

I purchased photo v carve yesterday and tried it out today.

I tried it on oak and pine but had no joy.

Tried it on corian, and this was the result. I think i lost the tip of my blade at some point so the quality isn't perfect by any means.

Image
craftyfifer
Vectric Apprentice
 
Posts: 11
Joined: Tue Sep 22, 2015 7:21 pm
Model of CNC Machine: self build

Re: my first try with photo v carve

Postby tonydude » Thu Jan 07, 2016 2:35 am

What are you trying to do with pic? A lithophane is made with corian and you invert the carving in the program.

Tony
Attachments
invert.JPG
tonydude
Vectric Apprentice
 
Posts: 76
Joined: Fri Apr 10, 2009 2:28 am

Re: my first try with photo v carve

Postby craftyfifer » Thu Jan 07, 2016 10:10 am

I wasn't trying to produce a lithophane. I just tried the sample little boy on a piece of corian that i had. I've got white corian 6mm coming to me, and will give the lithophane a go.

But for now i was just trying to work with th program, as I've never done this before.

Im sure i,ll master it lol

Thank you for your advice on the lithophane, I've read up on what to do, so will post up my trials and hopefully not tribulations.

regards alex
craftyfifer
Vectric Apprentice
 
Posts: 11
Joined: Tue Sep 22, 2015 7:21 pm
Model of CNC Machine: self build

Re: my first try with photo v carve

Postby craftyfifer » Fri Jan 08, 2016 9:27 am

so heres my first attempt at a lipothane. It was done on green corrian
as that was all i had. White corrian has been ordered

Image

Image
craftyfifer
Vectric Apprentice
 
Posts: 11
Joined: Tue Sep 22, 2015 7:21 pm
Model of CNC Machine: self build

Re: my first try with photo v carve

Postby tonydude » Sat Jan 09, 2016 1:33 am

Really can't see it up close, good for first time. When you upload pics use upload attachment for your pics.

Tony
Attachments
att.JPG
tonydude
Vectric Apprentice
 
Posts: 76
Joined: Fri Apr 10, 2009 2:28 am

Re: my first try with photo v carve

Postby craftyfifer » Sat Jan 09, 2016 7:40 pm

I'm trying to post but it wont go through?
craftyfifer
Vectric Apprentice
 
Posts: 11
Joined: Tue Sep 22, 2015 7:21 pm
Model of CNC Machine: self build


Return to PhotoVCarve - Gallery

Who is online

Users browsing this forum: No registered users and 2 guests