dollar store wood boxes
- deadgoodcharlie
- Vectric Apprentice
- Posts: 97
- Joined: Thu Jan 01, 2009 9:47 pm
- Location: Whitby Canad
dollar store wood boxes
these boxes are great for holding your lithophanes some have a plastic window in the top so your lithos would have to be based around that size opening.This box did not have the window so I unscrewed the lid and cut one out.
- deadgoodcharlie
- Vectric Apprentice
- Posts: 97
- Joined: Thu Jan 01, 2009 9:47 pm
- Location: Whitby Canad
Re: dollar store wood boxes
Also forgot to mention that I lined the sides and back with foil tape.deadgoodcharlie wrote:these boxes are great for holding your lithophanes some have a plastic window in the top so your lithos would have to be based around that size opening.This box did not have the window so I unscrewed the lid and cut one out.
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: dollar store wood boxes
I was going to comment on how bright the picture looked. Are you able to post pictures of the light set up and the inside of the box?.
Regards
Brian
Regards
Brian
- deadgoodcharlie
- Vectric Apprentice
- Posts: 97
- Joined: Thu Jan 01, 2009 9:47 pm
- Location: Whitby Canad
Re: dollar store wood boxes
Sure I'll post a pic some time today very simple but this setup has no on off switch as of yet.
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: dollar store wood boxes
Thanks for the heads-up on the boxes! I'll check them out today! I still haven't tried a Lithophane but I'm getting closer...
Mike
Mike
- deadgoodcharlie
- Vectric Apprentice
- Posts: 97
- Joined: Thu Jan 01, 2009 9:47 pm
- Location: Whitby Canad
Re: dollar store wood boxes
Here you can see the foil tape and the led strip.
- Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
Re: dollar store wood boxes
I have a Dollar type store nearby I will look and see if they have boxes. I see wooden boxes on Amazon for around 3 to 5 dollars depending on size.
I may try one or 2 for my V-Carved acrylics.
Don
I may try one or 2 for my V-Carved acrylics.
Don
- deadgoodcharlie
- Vectric Apprentice
- Posts: 97
- Joined: Thu Jan 01, 2009 9:47 pm
- Location: Whitby Canad
Re: dollar store wood boxes
Sounds good Don , waiting to see how they work out for you.