Hi
This is may first post in forum. I wonder what do U think about my three works in laminated MDF?
My works in laminated MDF
- bogusz87
- Posts: 11
- Joined: Wed Jun 05, 2013 6:18 pm
- Model of CNC Machine: INFOTEC
- Location: Poznań
- Contact:
My works in laminated MDF
website:
www.portretywdrewnie.pl
www.portretywdrewnie.pl
-
- Vectric Craftsman
- Posts: 233
- Joined: Wed Jul 10, 2013 3:43 am
- Model of CNC Machine: Home made
- Location: Canada
Re: My works in laminated MDF
Looks good!! Is laminated MDF different than regular MDF? Plus what was your technique for making these??
Thanks!
Thanks!
Re: My works in laminated MDF
Those came out excellent. What bit did you use and what were the settings? Hoping to see more from you.
Tony
Tony
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: My works in laminated MDF
Those are way cool, laminated MDF is "malimine" it is very good for this sort of thing as it offers great contrast (as you can see). how did you remove the backgrounds of the pictures?. i have had a wee dabble at doing this sort of thing (certainly not as good as you tho). i must post one for a laugh.
regards
Brian
regards
Brian
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: My works in laminated MDF
Sorry spelling oops.... Melamine Board
regards
Brian
regards
Brian
- bogusz87
- Posts: 11
- Joined: Wed Jun 05, 2013 6:18 pm
- Model of CNC Machine: INFOTEC
- Location: Poznań
- Contact:
Re: My works in Melamine MDF
Yes you're right it's rather melamine laminate is thicker and harder of course
website:
www.portretywdrewnie.pl
www.portretywdrewnie.pl
-
- Vectric Craftsman
- Posts: 208
- Joined: Sun Jan 26, 2014 12:59 pm
- Model of CNC Machine: CAMMaster Stinger II
- Location: Romney, WV
Re: My works in laminated MDF
Those look great, contrast with the white laminate and background really works. How did you color the background, did you use spray ink and wipe it off the melamine before it tried? Thanks for sharing these.
- bogusz87
- Posts: 11
- Joined: Wed Jun 05, 2013 6:18 pm
- Model of CNC Machine: INFOTEC
- Location: Poznań
- Contact:
Re: My works in laminated MDF
Thx for Your opinions. I'm very happy hearing your words.
After milling I used paintbrush to color milled area. Then removed color from white background (using water and wipe).
After milling I used paintbrush to color milled area. Then removed color from white background (using water and wipe).
website:
www.portretywdrewnie.pl
www.portretywdrewnie.pl