another litho
-
- Posts: 37
- Joined: Wed Feb 26, 2014 2:07 pm
- Model of CNC Machine: denford microrouter/denford triac
- Location: Snodland, Kent
- Contact:
another litho
Here is another litho that I have made. This come out really beautiful, amazing amount of detail.
[/URL]
[/URL]
[/URL]
[/URL]
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: another litho
Litho looks really good.
What size is it and what cutter did you use? How long did it take you to cut? I'm trying to get things together so I can cut a couple for Christmas.
Mark
What size is it and what cutter did you use? How long did it take you to cut? I'm trying to get things together so I can cut a couple for Christmas.
Mark
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: another litho
Beautiful, thanks. I'm waiting for my machine so I can try this, hopefully before Christmas.
-
- Posts: 37
- Joined: Wed Feb 26, 2014 2:07 pm
- Model of CNC Machine: denford microrouter/denford triac
- Location: Snodland, Kent
- Contact:
Re: another litho
The corian size is 8x6 (200x150), viewable size is approx 180x130. I tend to use a 1bn for the finish cut, this took about 2.5 to 3 hrs, at 2250 mm/m.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: another litho
All I can say is WOW WOW WOW
That picture is absolutely gorgeous
Cheers
Wolffie
That picture is absolutely gorgeous
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: another litho
One of best on forum. Congrats.
Angie
Angie
- martin54
- Vectric Archimage
- Posts: 7350
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: another litho
Yes have to agree with the others, very nice job, only thing I am not 100% sure about is the white line you have at the edge of the rope border you have put on but guessing there isn't much that can be done about that.
-
- Posts: 37
- Joined: Wed Feb 26, 2014 2:07 pm
- Model of CNC Machine: denford microrouter/denford triac
- Location: Snodland, Kent
- Contact:
Re: another litho
That's not a rope boarder I have put on! Its the stepover of the cutter that makes that, I was toying with the idea of running the 3bn round it as a profile, but I quite like it.martin54 wrote:Yes have to agree with the others, very nice job, only thing I am not 100% sure about is the white line you have at the edge of the rope border you have put on but guessing there isn't much that can be done about that.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: another litho
I like it too.
Cheers
Wolffie
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- martin54
- Vectric Archimage
- Posts: 7350
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: another litho
Shows just how much I know I thought it was something you had added, I like it as well it was just the white line on the inside where the corian is at it's thinnest. running a profile round might possibly make that more pronounced.large519 wrote:That's not a rope boarder I have put on! Its the stepover of the cutter that makes that, I was toying with the idea of running the 3bn round it as a profile, but I quite like it.martin54 wrote:Yes have to agree with the others, very nice job, only thing I am not 100% sure about is the white line you have at the edge of the rope border you have put on but guessing there isn't much that can be done about that.
I've not actually done any of these myself, I just like admiring other peoples work.
-
- Posts: 32
- Joined: Sat Dec 31, 2011 5:59 pm
- Model of CNC Machine: CastCNC
- Location: Bakersfield, CA
- Contact:
Re: another litho
That litho looks great. Do you have a pic showing the mechanics of how it's lit?
Chris...
Chris...