For a friend

Post by **woody53** » Mon Oct 20, 2014 12:50 pm

Did this yesterday and took WAAAAAAAAAAAAY too long. Is 4 1/4 x 4 3/4 and took 9 1/2 hours @ 100 IPM. Z movement was continuous, so that was the reason. Came out perfect very detailed.

Post by **pops1964** » Mon Oct 20, 2014 1:09 pm

Nice great detail . pop's

Post by **tonydude919** » Mon Oct 20, 2014 7:18 pm

Beautiful, lot of detail. What bit did you use that took so long?

Tony

Post by **woody53** » Mon Oct 20, 2014 11:08 pm

A 1/32 tapered ballnose, Tony. But I'm sure it was the enormous Z movement that slowed it down. You can see every little skin wrinkle and they are all carved, LOL.

Post by **pops1964** » Mon Oct 27, 2014 12:22 pm

Woody , I only use that size of litho's that are 2"x 3" or 2" x 2" , everything else I use 1/16" tapered ball nose , good luck Pop's

Vectric Customer

For a friend

For a friend

Re: For a friend

Re: For a friend

Re: For a friend

Re: For a friend