Bill's second Lithophane with a twist...

Gallery for images of work cut using PhotoVCarve
Post Reply
calgrdnr
Vectric Wizard
Posts: 970
Joined: Tue Mar 20, 2007 6:29 am
Model of CNC Machine: ShopBot prt with 4g upgrade
Location: Visalia, Ca

Re: Bill's second Lithophane with a twist...

Post by calgrdnr »

Iuse 30 degree one pass all the time :) I think 22 would work

Kent

disclaimer .... if you break bit not my fault :)
Top
Post Reply

Return to “PhotoVCarve - Gallery”