elephant night light

Gallery for images of work cut using PhotoVCarve

elephant night light

Postby tonydude919 » Fri Nov 23, 2012 4:26 am

Elephant night light measures 3.5" by 3' high. Took 2 hrs to cut using .125 ball nose for rough and .0625 ball nose for finish cut.

Tony
Attachments
elephant nite light.jpg
elephant light.jpg
tonydude919
Vectric Wizard
 
Posts: 758
Joined: Sat Jan 09, 2010 7:28 am
Location: Buffalo,NY
Model of CNC Machine: cnc mako shark extended bed

Re: elephant night light

Postby NormanAlbert » Fri Nov 23, 2012 1:44 pm

Hi: Great job. Might I offer a tip? If you use a 1/4 inch shank tapered .0625 4 flute ball nose from Bits n Bits you can eliminate the rough cut and directly do the finish cut. Those bits are very strong and last a long time. Plus being 4 flutes you can reduce the router rpm's almost by half and loose a lot of noise. Norm
NormanAlbert
Vectric Wizard
 
Posts: 385
Joined: Wed Apr 01, 2009 12:15 am
Location: Dunnellon, Florida

Re: elephant night light

Postby Phil » Fri Nov 23, 2012 2:36 pm

Do you have a link for Bits n Bits? I googled Bits n Bits and couldn't find what you mentioned.

Thanks,

Phil
User avatar
Phil
Vectric Wizard
 
Posts: 2324
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: elephant night light

Postby tonydude919 » Fri Nov 23, 2012 3:54 pm

Phil,

Heres the website for bits n bits http://bitsbits.com/

Norm,

Also, thanks for the tip for the tapered ballnose bit.

Tony
tonydude919
Vectric Wizard
 
Posts: 758
Joined: Sat Jan 09, 2010 7:28 am
Location: Buffalo,NY
Model of CNC Machine: cnc mako shark extended bed

Re: elephant night light

Postby mikeacg » Fri Nov 23, 2012 6:19 pm

Norm,

Do you have a part number for the 1/4 inch shank tapered .0625 4 flute ball nose? I can't find it on the website. I found a 2 flute but not a 4...

Thanks,

Mike :?
User avatar
mikeacg
Vectric Wizard
 
Posts: 650
Joined: Sun Nov 02, 2008 10:53 pm
Location: Newberry, MI
Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4


Return to PhotoVCarve - Gallery

Who is online

Users browsing this forum: No registered users and 3 guests