litho box with designs

[tonydude919]

Did a litho box with some designs. Used photo vcarve and imported in vcarve pro. Did the designs in vcarve pro.

Tony

[gary penwright]

nice job tony

[woody53]

Tony,
I really like the box design you have. I've never used LED's in a light box and I can see that the box can be really shallow. I've been using a florescent puck light, mainly because they are cheap, but they do light very well with no hot or cold spots. Actually, they last a very long time, too. Any way, I know I would need the light strips , 12 volt adapter, on & off switch , where is a good supplier, that won't cost an arm and leg ? Any help, would be appreciated. I did a new litho that I want to be as good as I can get it, and Led's seem the way to go.

Thanks, Dave

[David Warkentin]

Try hobbypartz.com for LEDs.

[tonydude919]

Here is site for leds http://www.ebay.com/itm/150801033133?ss ... 1497.l2649

Tony

[tonydude919]

Power Jack to Screw Terminals http://www.parts-express.com/pe/showdet ... er=335-372

SPST Automotive Round Rocker Switch Black http://www.parts-express.com/pe/showdet ... er=060-776

Tony

[Phil]

Tony - thanks for posting the supply sources.

Phil

PS

I used to live in the Buffalo area - Lackawanna near South Buffalo. I've been to Wiechech's - great fish fry. My brother goes there often.

[tonydude919]

Phil,

That is a great place for fish fries. I just live 5 minutes from there. I buy all my led lights and corian on ebay.

Tony