My first results with photovcarve

Post by **Alex Navarro** » Sat Jan 15, 2011 3:18 pm

Hi guys

I have photovcarve for several months but only now I had time to use it.

I'll post my work here so I'm doing and going through my experiences to help clear and can also help for me!

Below are some of my tests with different materials and bits

Post by **joecnc2006** » Sat Jan 15, 2011 6:07 pm

Look good, what were your settings for the pictures?

Post by **Phil** » Sat Jan 15, 2011 9:32 pm

Joe,

I like your web page for the DIY machines but your "Links" button goes to "Kits and Plans".

Phil

Post by **Alex Navarro** » Sat Jan 15, 2011 11:51 pm

joecnc2006 wrote:Look good, what were your settings for the pictures?

hi

These were some tests so I tried with some modifications.
For the negative pictures I think the best is .

The first image I did on acrylic with ball mill of 1.5 mm-piece-100x100x2mm. (Victor Wooten Bassplayer)
The second image I did a piece of hard wood - 1/8 V45º piece-120x90x15mm. (wife).

Cool your projects. If you want I can post a link its in my website.

Vectric Customer

My first results with photovcarve

My first results with photovcarve

Re: My first results with photovcarve

Re: My first results with photovcarve

Re: My first results with photovcarve