ceramic edge chipout

The Gallery is for posting images of work machined using Cut3D
Post Reply
User avatar
deadgoodcharlie
Vectric Apprentice
Posts: 97
Joined: Thu Jan 01, 2009 9:47 pm
Location: Whitby Canad

ceramic edge chipout

Post by deadgoodcharlie »

Well as you can see from the pics the first pass had chipout due to bit becomeing dull and starting off at 70 IPM. Earlier pics show what a new bit can do, but like I stated before proper feeds and speeds need to dialed in.
Attachments
100_2579.jpg
100_2580.jpg

Post Reply