Wine bottle holder

The Gallery is for posting images of work machined using Cut3D
Post Reply
ilsaarin
Vectric Craftsman
Posts: 157
Joined: Mon Dec 15, 2008 2:42 pm

Wine bottle holder

Post by ilsaarin »

Here you can see why I was looking for simple grape relief. Not so complicated product but sells pretty well. And it is always funny to look peoples faces when they try to find out how it stays as it is.
Attachments
pulloteline.jpg

John Murphy
Vectric Wizard
Posts: 678
Joined: Thu Jan 15, 2009 1:08 am
Model of CNC Machine: AXYZ 5010
Location: Maryhill Ontario Canada
Contact:

Re: Wine bottle holder

Post by John Murphy »

I've been thinking of marketing some of these as well. Did you do the design yourself, or did you use plans?

John

gravirozo
Vectric Wizard
Posts: 1978
Joined: Sat Jan 10, 2009 12:38 am

Re: Wine bottle holder

Post by gravirozo »

hello


my uncle on hungary tried to get patent for this... around 1985... but just like rubick's cube... it also got lost...
also a few couple of couriosity of bottleholders... it was drilled in jig with a simple forstnerfuro...

http://www.pointernet.pds.hu/bor/packin ... Különleges italtartók


thanks
viktor
Attachments
bortarto.jpg

ilsaarin
Vectric Craftsman
Posts: 157
Joined: Mon Dec 15, 2008 2:42 pm

Re: Wine bottle holder

Post by ilsaarin »

Woodworm wrote:I've been thinking of marketing some of these as well. Did you do the design yourself, or did you use plans?

John

I just found the measurements from the web and cut the relief. That's all. It seems that measurements are not so critical as long as the bottle has pretty long neck.

Ilkka

Rapiddawg
Vectric Apprentice
Posts: 99
Joined: Mon Nov 23, 2009 3:12 am

Re: Wine bottle holder

Post by Rapiddawg »

Ok I.ll bite, hows it work? is it by balance? how can i make one?

tmerrill
Vectric Wizard
Posts: 4797
Joined: Thu May 18, 2006 3:24 pm
Model of CNC Machine: ShopBot
Location: North Carolina

Re: Wine bottle holder

Post by tmerrill »

Here is one set of plans:

http://timelesstreasuretrunk.com/Woodwo ... wineholder

Do a google search for Wine Bottle Holder Plans, or something similar, and you will find more.

Tim

User avatar
ssflyer
Vectric Wizard
Posts: 912
Joined: Wed Nov 26, 2008 8:21 pm
Model of CNC Machine: ShopBot PRSAlpha 96x60
Location: Napa County, California

Re: Wine bottle holder

Post by ssflyer »

You really don't need any plans - pretty straightforward... I just cut a 45 degree on the bottom edge, and make it look like anything I want... Simply adjust the bottle to balance.
Attachments
HappyHallowine512_1.png
Ron Sloan

Rapiddawg
Vectric Apprentice
Posts: 99
Joined: Mon Nov 23, 2009 3:12 am

Re: Wine bottle holder

Post by Rapiddawg »

Thanks every one. SSFLYER that holder the pic is really awsome, that would be cool to have a wine party and have one for each guest.

Post Reply