Greetings,
I wanted to share with you my experiences of introduction to the world of CNC Carving.
As you may know from reading this forum, I have had a few difficulties getting all the correct components to work together.
Answers from this forum as well as questions from others have been invaluable.
So, here is my short recipe to success.
1. Find a nicely carved item. Mine came from a church that was carved in 1929 in Germany that was made to replicate something from an 18th century English Gothic Church.
2. Find a person to produce a good scan. I was lucky enough to meet Brady Watson, scanner extraordinaire. He produced the most detailed 3d model I could have imagined.
3. I used the Cut 3D program from Vectric and with the help of Tony Mac and Mark I was able to understand what to expect from the program
4. I am using a CNC Shark machine, and again, with the help of Tim Owens of Next Wave Automation, all things are working together.
So, all things considered, this has not been a bad start for me, considering all the help and guidance I received.
I look forward to working in this field for some time.
Thank you all again for the support.
Happy Holidays,
Michael
Secret to my success
- mezalick
- Vectric Wizard
- Posts: 2980
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Secret to my success
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- GripUs
- Vectric Wizard
- Posts: 806
- Joined: Thu Jan 18, 2007 2:07 pm
- Location: San Angelo, Texas
- Contact:
Re: Secret to my success
Well, Michael...
You are, indeed, off to a very fine start!! That is some good work and good advice.
You are right about Brady...best there is.
Regards,
Joe
You are, indeed, off to a very fine start!! That is some good work and good advice.
You are right about Brady...best there is.
Regards,
Joe
Ham and eggs - Inconvenient for the chicken. A total commitment for the pig.
http://www.gripus.com/
http://www.gripus.com/
- Thkoutsidthebox
- Vectric Wizard
- Posts: 1487
- Joined: Wed Oct 25, 2006 3:19 pm
- Location: Europe
Re: Secret to my success
That looks fantastic. The finish is amazing. Well done, and welcome!
Re: Secret to my success
Very nice start.
I hope to do that kind of work .........soon. And contribute to this forum as well.
I hope to do that kind of work .........soon. And contribute to this forum as well.
- DavidCousins
- Vectric Wizard
- Posts: 359
- Joined: Sat Mar 17, 2007 2:56 pm
- Location: Huntsville, Alabama
Re: Secret to my success
Mezalick,
Your church carving is amazing. Thanks for sharing.
Dave
Your church carving is amazing. Thanks for sharing.
Dave