Hello to all:
Would any be willing to share a file of a harmonica? 1st tine i've been asked for a harmonica image. I am using vcarve pro...Thank You, Robert...
Re: Image needed
- Martin Reid
- Vectric Apprentice
- Posts: 93
- Joined: Wed May 18, 2016 6:00 pm
- Model of CNC Machine: Shopbot
- Location: Lancashire UK
- Contact:
Re: Image needed
Dear Robert
I found the attached harmonica in the 3D warehouse. Opened it in sketchup and exported it as various DXF and STL files (all in the ZIP). They all seem to open OK in Partworks 3D. Other's will no doubt post instructions on how to open .SKP's directly into vCarve Pro.
Anyway; if this is not exactly what you want there are others there.
Sincerely and in good faith
Martin
Sorry 'File to big' (4½MB) post details of a drop box or WeTransfer and I'll put it there.
I found the attached harmonica in the 3D warehouse. Opened it in sketchup and exported it as various DXF and STL files (all in the ZIP). They all seem to open OK in Partworks 3D. Other's will no doubt post instructions on how to open .SKP's directly into vCarve Pro.
Anyway; if this is not exactly what you want there are others there.
Sincerely and in good faith
Martin
Sorry 'File to big' (4½MB) post details of a drop box or WeTransfer and I'll put it there.
Re: Image needed
Thank you for your assistance...really!!!
First time trying this but here it goes...
Here is an address in my dropbox, I hope this works, Thank You, Robert Tylisz...
https://www.dropbox.com/request/QuzuA9ADKoC2Tpb0NRPx
First time trying this but here it goes...
Here is an address in my dropbox, I hope this works, Thank You, Robert Tylisz...
https://www.dropbox.com/request/QuzuA9ADKoC2Tpb0NRPx
- Martin Reid
- Vectric Apprentice
- Posts: 93
- Joined: Wed May 18, 2016 6:00 pm
- Model of CNC Machine: Shopbot
- Location: Lancashire UK
- Contact:
Re: Image needed
Dear Robert
Have a look in your dropbox account.
There are four files in the ZIP that you can try (all 3D)
(1) Harmonica.DXF
(2) Harmonica.STL
(3) HarmonicaMESH.DXF
Each exported from Sketchup with Convert Sketchup SKP files to DXF or STL
https://www.guitar-list.com/download-so ... dxf-or-stl
No doubt others will explain how to import (SKP) sketchup 3d models directly onto vCarve pro
(4) Harmonica.v3d (from partworks 3D)
Acknowledgements of course to the sketchup model creator Lai
https://3dwarehouse.sketchup.com/model/ ... -Harmonica
Anyway I will watch the thread with intertest
Sincerely and in good faith
Martin
Have a look in your dropbox account.
There are four files in the ZIP that you can try (all 3D)
(1) Harmonica.DXF
(2) Harmonica.STL
(3) HarmonicaMESH.DXF
Each exported from Sketchup with Convert Sketchup SKP files to DXF or STL
https://www.guitar-list.com/download-so ... dxf-or-stl
No doubt others will explain how to import (SKP) sketchup 3d models directly onto vCarve pro
(4) Harmonica.v3d (from partworks 3D)
Acknowledgements of course to the sketchup model creator Lai
https://3dwarehouse.sketchup.com/model/ ... -Harmonica
Anyway I will watch the thread with intertest
Sincerely and in good faith
Martin