Re: Image needed

The Gallery is for posting images of work machined using Cut3D
Post Reply
rct01
Posts: 23
Joined: Sat Oct 23, 2010 12:22 am

Re: Image needed

Post by rct01 »

Hello to all:
Would any be willing to share a file of a harmonica? 1st tine i've been asked for a harmonica image. I am using vcarve pro...Thank You, Robert...

User avatar
Martin Reid
Vectric Apprentice
Posts: 93
Joined: Wed May 18, 2016 6:00 pm
Model of CNC Machine: Shopbot
Location: Lancashire UK
Contact:

Re: Image needed

Post by Martin Reid »

Dear Robert

I found the attached harmonica in the 3D warehouse. Opened it in sketchup and exported it as various DXF and STL files (all in the ZIP). They all seem to open OK in Partworks 3D. Other's will no doubt post instructions on how to open .SKP's directly into vCarve Pro.

Anyway; if this is not exactly what you want there are others there.

Sincerely and in good faith
Martin

Sorry 'File to big' (4½MB) post details of a drop box or WeTransfer and I'll put it there.

rct01
Posts: 23
Joined: Sat Oct 23, 2010 12:22 am

Re: Image needed

Post by rct01 »

Thank you for your assistance...really!!!
First time trying this but here it goes...
Here is an address in my dropbox, I hope this works, Thank You, Robert Tylisz...
https://www.dropbox.com/request/QuzuA9ADKoC2Tpb0NRPx

User avatar
Martin Reid
Vectric Apprentice
Posts: 93
Joined: Wed May 18, 2016 6:00 pm
Model of CNC Machine: Shopbot
Location: Lancashire UK
Contact:

Re: Image needed

Post by Martin Reid »

Dear Robert

Have a look in your dropbox account.

There are four files in the ZIP that you can try (all 3D)

(1) Harmonica.DXF
(2) Harmonica.STL
(3) HarmonicaMESH.DXF
Each exported from Sketchup with Convert Sketchup SKP files to DXF or STL
https://www.guitar-list.com/download-so ... dxf-or-stl
No doubt others will explain how to import (SKP) sketchup 3d models directly onto vCarve pro

(4) Harmonica.v3d (from partworks 3D)

Acknowledgements of course to the sketchup model creator Lai
https://3dwarehouse.sketchup.com/model/ ... -Harmonica

Anyway I will watch the thread with intertest
Sincerely and in good faith
Martin

Post Reply