I've been away for awhile...been swamped in work for the last 5-6 months, but I'm taking a breather today and thought I would show you some tables I came up with.
I used both Cut3D and VCarve to make these. I did the design work in Corel and exported the parts as eps. The clear acrylic inlays I did on the laser and they have an engraved design around their edges to help with blending in with the table top.
Peg did all of the stain work. If you notice, on the 3D reliefs, she took the time to stain them in a different shade from what the table was to be done in. It created a nice effect and helped to empasize the 3D.
Both tables are made from Oak.
Cut3D and VCarve Table Projects
Cut3D and VCarve Table Projects
- Attachments
-
- Running Horses end table
-
- Cat tail accent table
Dave
Epilog 24TT 40w and Legend 36EXT 75w Laser Engravers, Roland SP-300V, BabyLoc PR600 Embroidery Machine, Panther 24" Vinyl Cutter, Mighty Presses (hat & T-Shirt), PRT48 Router
Epilog 24TT 40w and Legend 36EXT 75w Laser Engravers, Roland SP-300V, BabyLoc PR600 Embroidery Machine, Panther 24" Vinyl Cutter, Mighty Presses (hat & T-Shirt), PRT48 Router