Hi All,
This is my first post and really my first cut with Cut3D (besides the demo tutorials). This software is great and does mostly what I need it to do. The one reason that sold the software to me was the axis orientation function particularly the mirror function. There was much deliberation over the multitude of 3d cam programs out there in this price range but Cut3D came out ahead when adding the pros and cons. There is one function that I would really like added ( or maybe a plugin ), that would do pencil line for some of the finer details. This cut took 20hrs ( rough and finish ) with a 1/2 inch hss twist drill 300mm long that I ball nosed on the bench grinder. Finding tooling that falls into our budget has been difficult to say the least. It was cut in SL grade EPS foam. It will be sealed, filled and hand finished for a mold to be taken, and then unfortunately thrown away. I think I will keep this first one though.
Anyway just thought I would do a post to say Gday and thank the vectric forum users for all their help while I have been developing this CNC and learning the software. Most of the time you don't need to do a post of the problem you are experiencing if you can use the search bar on almost any forum. It's probably happened to somebody before you.
Regards,
Nick