Dog and River Scenery
Dog and River Scenery
This came out real nice!
Cut3D is awesome!
Started with a 1.75" thick piece of cedar.
Double sided tape and 4 screws for my hold down.
7" x 8" x 1.5" total cut time = 6 hours
1/4" EM roughing, 1/16" BN finishing No slicing
Finished with Golden Pecan stain, no sanding...straight off the shopbot.
Randy
Cut3D is awesome!
Started with a 1.75" thick piece of cedar.
Double sided tape and 4 screws for my hold down.
7" x 8" x 1.5" total cut time = 6 hours
1/4" EM roughing, 1/16" BN finishing No slicing
Finished with Golden Pecan stain, no sanding...straight off the shopbot.
Randy
Hello,
Have a nice Day, Frank
Have a look here.mcurtis wrote:Very nice Randy. As a fellow lab admirer, do you mind sharing where you found the model?
Thanks for sharing
Maynard
Have a nice Day, Frank
You do not like my bad spelling?
Come and write in a "German-Forum".
Come and write in a "German-Forum".
- 3dmodelclub
- Posts: 41
- Joined: Tue May 06, 2008 11:30 pm
- Location: Hong Kong
- Contact:
- Thkoutsidthebox
- Vectric Wizard
- Posts: 1487
- Joined: Wed Oct 25, 2006 3:19 pm
- Location: Europe
-
- Vectric Wizard
- Posts: 736
- Joined: Sat Aug 18, 2007 5:19 am
- Model of CNC Machine: shobot 48x96
- Location: portland oregon
- Contact:
- Thkoutsidthebox
- Vectric Wizard
- Posts: 1487
- Joined: Wed Oct 25, 2006 3:19 pm
- Location: Europe
- AngelicDiablo
- Vectric Craftsman
- Posts: 161
- Joined: Sun Oct 15, 2006 1:46 am
- Model of CNC Machine: Shopbot BT48 Standard
- Location: Houston, Texas
- Contact:
These bits work great for deep 3D cutting. OAL is 3".
http://www.beckwithdecor.com/index_files/Cutters.htm
-AD
http://www.beckwithdecor.com/index_files/Cutters.htm
-AD
Buckle up... it makes it harder for the aliens to suck you out of your car!
- AngelicDiablo
- Vectric Craftsman
- Posts: 161
- Joined: Sun Oct 15, 2006 1:46 am
- Model of CNC Machine: Shopbot BT48 Standard
- Location: Houston, Texas
- Contact:
These bits work great for deep cutting. OAL is 3".
http://www.beckwithdecor.com/index_files/Cutters.htm
-AD
http://www.beckwithdecor.com/index_files/Cutters.htm
-AD
Buckle up... it makes it harder for the aliens to suck you out of your car!
These are the cutters I've been using for 3D work.
http://www.beckwithdecor.com/index_files/Cutters.htm
RB
http://www.beckwithdecor.com/index_files/Cutters.htm
RB
Re: Dog and River Scenery
That is very nice work. I would love to be able to do that. I love my Labs.