Golfer is progressing

The Gallery is for posting images of work machined using Cut3D

Golfer is progressing

Postby Len-Tikular » Sun Jan 29, 2012 8:24 pm

I have had a great deal of help with this job which has been giving me a bit of a challenge. But with the expert help and having done a test cut I'm ready to cut my complete shield which I will post up soon. The test piece will be incorporated into my shield.

One of my difficulties was in finding a realistic lookin golfer, yay we did that...

Truly these forums have some great guys on board who do put time aside to help others. I'm deeply grateful.

George
Attachments
GolferTree.jpg
joe williams trophy.jpg
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Apprentice
 
Posts: 356
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3

Re: Golfer is progressing

Postby metalworkz » Sun Feb 05, 2012 7:00 pm

Hello George,
The trophy plaque is looking very good so far and will be watching to see the final cut part. Keep us posted on your progress.
Best regards,
Wes
wes.spence@comcast.net
Gingery Machines:
Lathe, Horiz. Mill, Shaper, Leaf Brake
User avatar
metalworkz
Vectric Wizard
 
Posts: 2446
Joined: Mon Mar 31, 2008 3:26 am
Location: Modesto, California 95358 USA
Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers

Re: Golfer is progressing

Postby Len-Tikular » Sun Feb 26, 2012 4:54 pm

metalworkz wrote:Hello George,
The trophy plaque is looking very good so far and will be watching to see the final cut part. Keep us posted on your progress.


Well, I plucked up the courage to cut into my nice piece of Oak, I'm not dissapointed with the result. I hope Joe will be pleased.

The 9 rectangles were pasted in using Photoshop and represent 9 Silver name places.

Many thanks to a certain gentleman for lots of advice and help. :-)


George
Attachments
Joes Tropphy.jpg
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Apprentice
 
Posts: 356
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3

Re: Golfer is progressing

Postby zeeway » Sun Mar 04, 2012 10:01 pm

Both the plaque and the golfer's form are looking good. :)

Angie
User avatar
zeeway
Vectric Wizard
 
Posts: 3157
Joined: Thu Feb 11, 2010 9:24 pm
Location: SC, USA
Model of CNC Machine: Self-built

Re: Golfer is progressing

Postby Len-Tikular » Wed Mar 07, 2012 2:48 pm

zeeway wrote:Both the plaque and the golfer's form are looking good. :)

Angie

Thanks for your kind comments.
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Apprentice
 
Posts: 356
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3

Re: Golfer is progressing

Postby jonquilmusic » Mon May 07, 2012 2:10 am

A trophy worthy of the designation "trophy." REAL nice job, and a lot of thought into the layout.
User avatar
jonquilmusic
 
Posts: 12
Joined: Tue Nov 09, 2010 11:15 pm

Re: Golfer is progressing

Postby Len-Tikular » Mon May 07, 2012 6:28 pm

jonquilmusic wrote:A trophy worthy of the designation "trophy." REAL nice job, and a lot of thought into the layout.

Many thanks for you kind comments.

George
Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Len-Tikular
Vectric Apprentice
 
Posts: 356
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3


Return to Cut3D - Gallery

Who is online

Users browsing this forum: No registered users and 1 guest