Trial version Leaf design

The Gallery is for posting images of work machined using Cut3D

Trial version Leaf design

Postby Len-Tikular » Sun Nov 13, 2011 5:45 pm

Cut this using the trial version of CUT3d. had to port it over to Vcarve pro because the output file from Cut3d gave a 'Line error' when opened in Mach3. Very strange because the output from Vacarve pro to Mach3 was fine.

I found that the 'cutout' path was not as good as I would have liked it. I stepped down 2mm at a time using a 4mm end mill to a depth of 20.5mm. Should I have done a profile pass after the cut out path.

Many thanks

Len-Tikular (A glider pilots dream cloud)

Aspire v4.0
User avatar
Vectric Wizard
Posts: 366
Joined: Sat Feb 13, 2010 11:27 am
Location: Denholm Scotland.
Model of CNC Machine: Home made revision 3

Return to Cut3D - Gallery

Who is online

Users browsing this forum: No registered users and 1 guest