I decided to pass on this project since it is too different from our normal work. I have the STL file in addition to a drawing in PDF format.
This object is about 13" in diameter. It would need to be machined out of some type of plastic. It could be made in pieces and assembled.
The customer is located in western Alaska.
Contact me by private messate or e-mail if you are interested and I'll connect you with the customer.
Anyone interested in this project?
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Anyone interested in this project?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Anyone interested in this project?
Thanks for all the interest. I've had enough people respond. I'll forward their contact information to the customer.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop