Hello.
Forgive the bad English .
I just purchased a license to CUT3D .
I created a very great model and I decided to cut it using the Slice function, but seems to be missing a slice ( maybe even more than one , now stopped ) .
I have a thickness of 100mm that I divided into 6 slices 19mm . I also used the two -side function.
I then sliced 3 lower and 3 above .
Now that I cut the 3 parts below ( that fit discreetly ) I started to cut the first upper face , but not absolutely meets with the third lower face ( it's too small... ) .
To create the slices I left the center of the material in half . What am I doing wrong? I hope you can help me .
Greetings.
Alessio from Italy
problem with slicing model
- Rcnewcomb
- Vectric Archimage
- Posts: 5919
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: problem with slicing model
Try watching the slicing video on this page: ->Cut3D Training Videos
It downloads as an EXE file. After it has downloaded you can double-click on the file to watch it.
It downloads as an EXE file. After it has downloaded you can double-click on the file to watch it.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: problem with slicing model
Thanks. The problem is where the model is slicing. Thanks