smooth out tool path for Weeke BHC550

This forum is for general discussion about Cut3D
Post Reply
shopbrain
Posts: 2
Joined: Tue Dec 29, 2015 9:17 pm
Model of CNC Machine: Weeke BHC 550

smooth out tool path for Weeke BHC550

Post by shopbrain »

I am having a problem with the tool paths generated using Cut3D. They are segmented straight lines instead of arch's and its causing the head of the cnc to shack violently. I am importing an stl from autocad. I have the smoothness of the stl model up as high as autocad will go (tried it lower and get even more shack) any suggestion would be great. I have attached two screen shots to help out 1 is the leg and the other is the roughing cut
Attachments
leg.png
leg1.png

shopbrain
Posts: 2
Joined: Tue Dec 29, 2015 9:17 pm
Model of CNC Machine: Weeke BHC 550

Re: smooth out tool path for Weeke BHC550

Post by shopbrain »

The feed speed i run is only 5meters per min not 8 :D

Post Reply