Hi all can anyone help me out, I have a ToolTec KJ3030 Machine, fairly new to it all, and trying out the Bowl sample file.
However it will not allow me to save the file as a .TAP and my machine is not listed in the Postprocessor list, Manual says download the drivers....................where from
Any help gratefully received
KJ3030 Drivers
- Adrian
- Vectric Archimage
- Posts: 14656
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: KJ3030 Drivers
What is the controller software that you use for that machine? That's the most important thing with which Post Processor to use when you save the toolpath file. A lot of machines use Mach3 so people will use that regardless of the make of their machine.
Drivers are usually the software components that you install on the controller PC for the controller software to communicate with the CNC itself.
Drivers are usually the software components that you install on the controller PC for the controller software to communicate with the CNC itself.
-
- Posts: 9
- Joined: Mon Nov 24, 2014 3:19 pm
- Model of CNC Machine: KJ 3030
- Location: Oswestry Shropshire
Re: KJ3030 Drivers
Hi I am afraid I do not know, what you mean,
-
- Posts: 9
- Joined: Mon Nov 24, 2014 3:19 pm
- Model of CNC Machine: KJ 3030
- Location: Oswestry Shropshire
Re: KJ3030 Drivers
2nd thoughts I am using Bravo Prodigy if that helps
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: KJ3030 Drivers
Hello,
The standard G-Code Arcs post processors included with Cut3D work fine
with the machine that you have mentioned.
I hope that this helps,
Cheers,
Mark.
The standard G-Code Arcs post processors included with Cut3D work fine
with the machine that you have mentioned.
I hope that this helps,
Cheers,
Mark.
-
- Posts: 9
- Joined: Mon Nov 24, 2014 3:19 pm
- Model of CNC Machine: KJ 3030
- Location: Oswestry Shropshire
Re: KJ3030 Drivers
Thanks Mark will try it out later