brisbane user cut 3d
brisbane user cut 3d
Lookint to talk to a local,
Cut 3D user Brisbane Australia
thanks Robbo
Cut 3D user Brisbane Australia
thanks Robbo
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: brisbane user cut 3d
Tully Heads might be a bit too far for you?
Cheers
Wolfffie
Cheers
Wolfffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Re: brisbane user cut 3d
Thanks but it may be a bit far to drive. Will see how I go as I would like to sit and chat and go through what I want to do.
Thanks again.
Thanks again.
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: brisbane user cut 3d
Can you guys meet in the middle and go over it with a laptop
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: brisbane user cut 3d
still a bit far apart, as we are about 1800 clicks from each other.
good idea
thanks Robbo
good idea
thanks Robbo
-
- Posts: 46
- Joined: Fri Nov 16, 2012 12:38 pm
- Model of CNC Machine: 3 axis Router 1500mm x 4000mm Bed
- Location: Gold Coast, Australia
Re: brisbane user cut 3d
I'm on the Gold Coast Robbo, I dont read the forums often enough so sorry for the slow reply.
I use Cut3D and Aspire, I'm still learning the software but if I can help I will.
Send me a pm with your email and I'll give you some contact details.
Rick
I use Cut3D and Aspire, I'm still learning the software but if I can help I will.
Send me a pm with your email and I'll give you some contact details.
Rick
-
- Posts: 21
- Joined: Fri Jul 13, 2012 9:32 am
- Model of CNC Machine: Quick
- Location: Gold Coast, Australia
- Contact:
Re: brisbane user cut 3d
Gold Coast here also. It would be good to be in contact with other users nearby for sure. PM me if either of you guys would like contact details.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: brisbane user cut 3d
Good to see the Aussies coming forward
Cheers
Wolffie
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Re: brisbane user cut 3d
Haha, 1800 ks apart and still in the same state. Take that Texas!
- ssflyer
- Vectric Wizard
- Posts: 912
- Joined: Wed Nov 26, 2008 8:21 pm
- Model of CNC Machine: ShopBot PRSAlpha 96x60
- Location: Napa County, California
Re: brisbane user cut 3d
LOL - you forgetting Alaska? Over twice as big as Texas, and 1/5th the size of the rest of the entire country!!
Ron Sloan
Re: brisbane user cut 3d
Haha, no Ron I deliberately left out Alaska even though it's still smaller than Queensland (QLD BTW is only the second biggest state in Oz).
The saying is "as big as Texas", not "as big as Alaska".
The saying is "as big as Texas", not "as big as Alaska".