cut3d and shopbot - French user

Post by **grandpi** » Sat Jan 27, 2007 12:33 pm

Hi guys,

I would like to know if cut3d and vcarve pro could be used easily with a shopbot cnc router : i am on the point to buy a 120/60 prt alpha.
Thank you for answer.
Pierre GRAND

Post by **Bob Reda** » Sat Jan 27, 2007 1:52 pm

If it was any easier my wife would be able to do it

Bob

Post by **Geraldw** » Sat Jan 27, 2007 2:51 pm

My wife is learning it, and easily.

Post by **BrianM** » Sat Jan 27, 2007 4:32 pm

Hi Pierre,

We have a large number of customers with ShopBots so all the Vectric programs work very well with the ShopBot routers, and ShopBot themselves sell VCarve Pro and PhotoVCarve.

Brian

Post by **Paco** » Sat Jan 27, 2007 4:34 pm

Bonjour Pierre!

Les logiciels de Vectric sont, a mon sens les plus facile à utiliser. Ils aussi très abordables et le support que l'on peut recevoir de l'équipe Vectric et de la communauté d'utilisateur est tout simplement incroyable.

Je possède une machine ShopBot et utilise régulièrement V Carve PRO et Cut 3D. Laisse-some modeling software savoir si je peux t'être utile.

Ton coussin Québécois!

Translation (just in case):
------------------------------
Hi Pierre!

Vectric's softwares are, if you ask me, the most easy to use of all. They are very affordable and the support we can get from both Vectric and the user community is simply incredible!

I own a ShopBot tool router and regularly use V Carve PRO and Cut 3D. Let me know if I can be of any use in any way.

Your Québécois cousin!

Post by **grandpi** » Sat Jan 27, 2007 7:18 pm

Thank you for all these answers !!
It confirms me that Vectric product are great...for a great price : in France, the two software propositions i had concerned Artcam pro (8 500,00 Euros Ht !!) and Visuallmill (1 000,00 euros).

I'm going to became a new cut3d user in few weeks....Maybe the first french one, BrianM ?

bye. Stay in touch with all of them.

Post by **Paco** » Sat Jan 27, 2007 7:36 pm

grandpi wrote:I'm going to became a new cut3d user in few weeks....Maybe the first french one, BrianM ?

Post by **Tony Mac** » Sat Jan 27, 2007 8:00 pm

Hi / Bonjour Pierre,

Not quite our first Cut3D user in France but a very close 2nd.

It's worth remembering that if you download the Trial versions of the
software products you will be able to cut the evaluation files on your
ShopBot router.

Good luck with the router and let us know if you have any questions,

Tony

Post by **lpcsales** » Sun Jan 28, 2007 2:28 am

Yes! Most definitely. I have a ShopBot Prt48 and there is absolutely no problems in using VCP, CUT3d or Photo VCarve with the system. You will be totally happy!

Now...go get that shopbot!