Loon Mantel
Moderator: Todd Bailey
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Loon Mantel
This is a part cut by David McNutt. I believe it was a half inch piece of Walnut glued to a lighter wood (sorry can't remember type). The toolpaths for the 3D files were both generated in 3D machinist. Then they were imported into VCPro and the background between them area cleared. This is straight off the machine. Hopefully a finished picture will follow soon. Thanks for the image Dave!
- Les_linton
- Vectric Craftsman
- Posts: 148
- Joined: Sun May 28, 2006 5:52 pm
- Model of CNC Machine: ViperX7
- Location: Pekin, IL
- djmcnutt
- Posts: 26
- Joined: Thu May 18, 2006 2:03 pm
- Model of CNC Machine: ShopBot
- Location: Mercer, WI
- Contact:
Thank you James for all your help and posting the picture!
Here is another picture placed over the fireplace, still not done though. I had to get something soon for a open house just to show. As soon as it is finished I will post a completed picture. I had allot of interest at the open house and requests for quotes.
Here is another picture placed over the fireplace, still not done though. I had to get something soon for a open house just to show. As soon as it is finished I will post a completed picture. I had allot of interest at the open house and requests for quotes.