Its A Boy!
Moderator: Todd Bailey
- mboydraska
- Vectric Craftsman
- Posts: 238
- Joined: Sun Jun 10, 2007 12:07 am
- Model of CNC Machine: 3 axis homebuilt
- Location: Iowa
- Contact:
Its A Boy!
Attached is an unfinished plaque I did for my daughter who had her second child, my third grandchild Tuesday. It turned out rather well. Just have to add a frame with alittle sanding and finish. The plaque is approx 3/4 - 8in x 12in made from scrap maple. I started out cutting the blocks then pocketed around them. The depth was 0.37inches needless to say I cut away a lot of material to get what I wanted.
HAPPY CUTTING
Mike
Mike
- capnl
- Vectric Wizard
- Posts: 416
- Joined: Thu Sep 25, 2008 4:31 pm
- Model of CNC Machine: Heiz Z-1000
- Location: The Netherlands - Zuidland (3214)
- Contact:
Re: Its A Boy!
Hi Grandpa,
congratulations with the new familymember also to Grandma, Mum Dad and the rest
Cheers
John
btw: Nice Plaque, also share the finished version with us !!
congratulations with the new familymember also to Grandma, Mum Dad and the rest
Cheers
John
btw: Nice Plaque, also share the finished version with us !!
DRW-Holland
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D
- ssflyer
- Vectric Wizard
- Posts: 912
- Joined: Wed Nov 26, 2008 8:21 pm
- Model of CNC Machine: ShopBot PRSAlpha 96x60
- Location: Napa County, California
Re: Its A Boy!
Congratulations - it looks great! One of the first things that happened after I got my machine and software was a: "Granddaughter!" So a plaque was one of the first things off my machine! What more can we ask, but to give for our future generations! Here's a picture of mine, but keep in mind, this was basically a copy of a Vectric tutorial - yours shows more creativity!
I can't say welcome to the grandpa club, but every one is like a new one, a real treasure!
I can't say welcome to the grandpa club, but every one is like a new one, a real treasure!
Ron Sloan
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
- mboydraska
- Vectric Craftsman
- Posts: 238
- Joined: Sun Jun 10, 2007 12:07 am
- Model of CNC Machine: 3 axis homebuilt
- Location: Iowa
- Contact:
Re: Its A Boy!
Thank you all.I am excited to see him. One nice thing about grandkids, spoil them send them home.
capnl - I will post once finished, haven't decided on how I will do it. Any suggestions?
ssflyer - that is a nice plaque I like the design. BTW that is my wifes birthday also.
woodworm - Congratulations to you, hope everyone is doing well.
capnl - I will post once finished, haven't decided on how I will do it. Any suggestions?
ssflyer - that is a nice plaque I like the design. BTW that is my wifes birthday also.
woodworm - Congratulations to you, hope everyone is doing well.
HAPPY CUTTING
Mike
Mike
- capnl
- Vectric Wizard
- Posts: 416
- Joined: Thu Sep 25, 2008 4:31 pm
- Model of CNC Machine: Heiz Z-1000
- Location: The Netherlands - Zuidland (3214)
- Contact:
Re: Its A Boy!
Hi Grandpa (John) Woodworm,
Also congratulations with the new familymember and to Grandma, Mum, Dad and the rest
Cheers
John
Also congratulations with the new familymember and to Grandma, Mum, Dad and the rest
Cheers
John
DRW-Holland
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D
CNC-Step S-1000 machine 1000 x 590 x 110 mm
Aspire - VCarve Pro - Photo VCarve - Cut3D
Re: Its A Boy!
congrats for all granpa... my son still hold this surprise me...
great looking plates...
for me the wood looks best in it's nature...
thanks
viktor
great looking plates...
for me the wood looks best in it's nature...
thanks
viktor