Pheasants in Bloodwood
Moderator: Todd Bailey
- Rcnewcomb
- Vectric Archimage
- Posts: 5930
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Pheasants in Bloodwood
This was carved with a 1/4" end mill and a 1/"4 ball nose in bloodwood and then glazed. I probably need to pony up for the extra computer memory so we can carve this with an 1/8" ballnose. The whole piece is 15" by 20".
- Attachments
-
- Pheasants61.jpg
- (127.37 KiB) Downloaded 646 times
-
- Posts: 3
- Joined: Fri Oct 20, 2006 11:11 pm
- Location: Mound, Minnesota
Randy,
congrats for ordering your bot, we met this year at the MPLS camp and talked for awhile. if you need anyhelp with learning curve or set up drop me a line
gizmosbyjd@aol.com
Good luck
JD
congrats for ordering your bot, we met this year at the MPLS camp and talked for awhile. if you need anyhelp with learning curve or set up drop me a line
gizmosbyjd@aol.com
Good luck
JD
JD