Cedar Jesus

Gallery for samples created from Design and Make 3D Machinist or using Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Xxray
Vectric Wizard
Posts: 2300
Joined: Thu Feb 17, 2011 8:47 am
Model of CNC Machine: CAMaster Stinger 1
Location: MI USA

Cedar Jesus

Post by Xxray »

Cedar is probably one of the last things 3D makers think of when thinking of material for models, but I've always wanted to give it a try.
Glad I did, some pretty wild grain patterns, and overall pleasing look. Shapes very well ... The knot, at first I was not going to include it, but I thought it would give the piece character, so long as it didn't fracture while cutting. Didn't want it on the face though, the location worked out just right.
Attachments
1JPG (Large).jpg
Doug

buck4
Vectric Craftsman
Posts: 277
Joined: Sat Mar 29, 2008 8:00 pm
Location: Millington, MI
Contact:

Re: Cedar Jesus

Post by buck4 »

nice work, love the smell of cedar in the shop

User avatar
Xxray
Vectric Wizard
Posts: 2300
Joined: Thu Feb 17, 2011 8:47 am
Model of CNC Machine: CAMaster Stinger 1
Location: MI USA

Re: Cedar Jesus

Post by Xxray »

Very true, the pleasant aroma is an added bonus.
Creates a very fine dust though ,,All in all, I'm impressed cedar.
Shapes nicely, easily available and fairly cheap.
Doug

Mick Martin
Vectric Craftsman
Posts: 270
Joined: Thu Dec 03, 2009 7:36 am
Model of CNC Machine: CAMaster 508 ATC + Rotary
Location: Snohomish, WA
Contact:

Re: Cedar Jesus

Post by Mick Martin »

Nice work Doug,

What finish did you use?
What is the size of the project?
What tooling did you use?

I know I ask a lot of questions.

Mick
Mick Martin
Aspire 4.015
http://mickmartinwoodworking.com/

User avatar
Xxray
Vectric Wizard
Posts: 2300
Joined: Thu Feb 17, 2011 8:47 am
Model of CNC Machine: CAMaster Stinger 1
Location: MI USA

Re: Cedar Jesus

Post by Xxray »

Model is about 10x6".
I started a rough pass with a 1/4 ball nose, but I only ran it to 25% or so. After that, it was taking nothing off except at the edges, just a waste of time & electricity. So I aborted the rough and went right to the finish, which I used a 1/8 tapered spiral for, at 8% stepover. Took about 90 minutes, was well satisfied with the result.
I used 2 coats of walnut stain, with light sanding in between coats. Was going to clear coat, but it sure looked glossy enough to me without it.
Doug

Post Reply