Cut this out of 3/4 blue foam, and I wanted to find out how it looked with a back light.
Well, I found out - Looks pretty eerie, definitely an eye catcher.
This ones pretty large, about 12x7 ,,, And I cut it pretty much as if it was wood.
Used a roughing pass with a 1/4 endmill, then a finish with 1/8 ballnose. Took about 2.5 hours all told, not bad.
Foam Jesus
Moderator: Todd Bailey
-
zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Foam Jesus
A bit spooky, but I like it.
Angie
Angie
-
lazaffair
- Vectric Apprentice
- Posts: 63
- Joined: Wed Jul 22, 2009 5:05 pm
- Location: Fox Island, WA
- Contact:
Re: Foam Jesus
If you are going to backlight it, why not cut it out as a Lithophane? I bet it would look awesome.
Jerre
Jerre
2x5 CNC router, Taig CNC Mill & Lathe, Epilog32 Laser, Tajima M Emb, Jaguar II Vinyl, NH T1510